contact us
Tel: (65) 62428876 Operation Hours
Monday to Friday |
NVIDIA® Jetson™ TX1/TX2/TX2i Carrier (87×57 mm)
Astro is specifically designed to work with the NVIDIA® Jetson™ TX1/TX2/TX2i supercomputer-on-module. The Astro Carrier provides access to features found on the Jetson™ TX1/TX2/TX2i module in an extremely small footprint (87 x 57mm). It makes use of a high density, board-to-board connector that allows for use with Connect Tech’s off the shelf or custom designed break out boards.
Compatibility | NVIDIA® Jetson™ TX1, TX2 or TX2i |
Video Input | 1x MIPI CSI-2 (2-lane) 2x GMSL * Power-Over-Coax Not Supported, external power must be provided to GMSL Camera Module |
Display | 1x HDMI interface (Supports up to HDMI 2.0 UHD 4K [2160p] at 60Hz |
USB | 1x USB 3.0 2x USB 2.0 |
UART | 2x RS-232/422/485 hardware selectable ports |
CAN | 1x CAN bus |
GPIO | 4-bit GPIO |
Mini PCIe/mSATA | 1x half size card or 1x full length card, PCIe and USB signalling (Mini PCIe) |
Storage | 1x mSATA, half size card |
Network | 2x Gigabit (10/100/1000) Ports: 1 from on-board Intel 82574 PHY/Controller 1 from the Jetson™ TX1 Module, 2x Gigabit (10/100/1000) Ports |
Audio | 1x HDMI Integrated Audio 1x stereo output |
Misc. | I2C RTC battery input System Control (PWR and RST buttons, etc.) |
Connectors | 90-pin QSH Samtec connector to be mated to Connect Tech Inc. breakout boards |
Dimensions | 87mm x 57mm (3.43″ x 2.24″) |
Power Requirements | +7.5V to +14.0V DC Input Range +12V DC Nominal Input |
Operating Temperature | -40°C to +85°C |
Weight | • ASG001 (Astro Carrier): 46 grams (with stand-offs attached) • XBG201 or XBG206 (Breakout Board): 51 grams • Astro + Jetson TX2/TX2i/TX1: 144 grams (with heatsink); 75 grams (without heatsink) |
Model | Description |
ASG001 | Astro Carrier for NVIDIA® Jetson™ TX1/TX2/TX2i |
ASG012 | Astro Carrier for NVIDIA® Jetson™ TX1/TX2/TX2i with GMSL |
XBG201 | Astro Carrier Breakout Board FOR TX1/TX2 |
XBG206 | Astro Carrier Breakout Board FOR TX2i |
XHG301 | TX2/TX1 Passive Heat Sink |
XHG302 | TX2/TX1 Active Heat Sink |
XHG303 | TX2i Passive Finned Heatsink |
XHG304 | TX2i Active Thermal Heatsink |
Model | Description |
CKG041 | ASG001 Full Cable Kit |
CBG134 | 10-pin Minitek to flying Lead Cable (for System Control Header) |
CBG111 | Dual DB-9 Panel Mount to 10-Pin Minitek Cable |
CBG112 | 6-Pin Minitek to Flying Lead Cable (for I2C Header) |
CBG118 | Dual Audio (uses HP out only) to 8-Pin Minitek Cable |
CBG136 | CR2032 RTC Battery w/ 3-pin Connector Cable Assembly – 6032101013 |
CBG225 | U.FL to SMA (for ASG012) |
MSG070 | Astro Multi-Region Power Supply |