JMM-5000

PC/104+ 100~218W DC/DC Power Supply with +5V/+12V/+3.3V/standby voltages, Heatsink/Heatspreader

  • Description
  • Specifications
  • Ordering Guide

JMM-5000 is a series of high-efficiency, high-precision PC/104 form factor DC/DC power supplies with complete DC-DC voltage regulator circuitry, integrated thermal solution, detachable screw terminal block I/O connections, and PC/104+ bus connectors. The wide input voltage range of 7 to 34VDC is compatible with industry standard 12V, 24V, and 28V inputs.

On-board intelligence provides an unsurpassed level of control, monitoring and safety. All features are accessible and configurable via benchtop application software plus a programming library for real-time control.

The full featured JMM-5312 models include a system controller that offers advanced configuration, control, and monitoring features. The system controller is accessed via a USB port and is accompanied by benchtop configuration software as well as an application library for in-application real-time control.

• Individual supply on/off control for +12V, +5V, +5V standby, +3.3V, and +3.3V standby outputs
• Individual supply output voltage / current monitoring
• Output voltage sequencing and slew rate control
• Output voltage adjustment
• Input voltage monitoring
• Fault handling based on programmable limits with interrupt notification, including supply shutdown in case of overload or other programmed conditions
• Hiccup mode for auto-restart when fault conditions are removed
• Min / max voltage and temperature logging
• Secondary input cutover voltage selection

The JMM-5000 uses a state-of-the-art design with the latest generation high efficiency components. It delivers efficiency as high as 95 percent, reducing input power requirements as well as heat generation.

JMM-5000 was engineered for rugged applications such as automotive or on-vehicle. Extended temperature operation of -40°C to +85°C is tested and guaranteed. Low-profile, surface mount components reduce susceptibility to shock and vibration. Both a low profile heat sink and heat spreader cooling options are available. I/O connections are made with locking screw terminal blocks for the highest degree of ruggedness.

Input voltage 7 – 34VDC
Input protection Over / under voltage, reverse polarity, surges, transients, reflected noise
Output voltage / current +5V at 20A max.
+12V at 8A max.
+3.3V at 5A max.
+5V standby at 1A max.
+3.3V standby at 0.1A max.
Output protection Current limit and short circuit protection
Load regulation ±0.8%, Vmin to Vmax, 0-100% load on all outputs, -40°C to +85°C
0.35% maximum output voltage droop at 5V output, 0-20A load, VIN = 12V, TA = 25°C
Output ripple 44mV peak-to-peak max.
12mV peak-to-peak at 5V output, 0-20A load, VIN = 12V, TA = 25°C
Efficiency 92-94% at 5V output, 0-20A load, VIN = 12V, TA = 25°C
Transient load response +/-72mV at 5V output, 25-75% load step, 2.5A/usec ramp rate, VIN = 24V, TA = 25°C
Temperature stability +/-0.5% at 5V output, 10A load, VIN = 24V, TA = -40°C to 85°C
On / off Remote or programmable on/off logic input
Bus Interface PC/104+
Dimensions 90 x 96 mm
Maximum height 0.435″ (11mm) above PCB top surface
Operating temperature -40°C to +85°C
Operating humidity 5% to 95% non-condensing
Weight 179g with heatsink
230g with heat spreader
Model Description
JMM-5312-APDRK PC/104+ 218W DC/DC power supply with +5V/+12V/+3.3V/standby voltages, heat sink
JMM-5312-ADRK PC/104 218W DC/DC power supply with +5V/+12V/+3.3V/standby voltages, heat sink
JMM-5312-APDRH PC/104+ 218W DC/DC power supply with +5V/+12V/+3.3V/standby voltages, heat spreader
JMM-5312-ADRH PC/104 218W DC/DC power supply with +5V/+12V/+3.3V/standby voltages, heatspreader
JMM-5012-APK PC/104+ 196W Power Supply with +5V/+12V, heatsink
JMM-5012-AK PC/104 196W Power Supply with +5V/+12V, heatsink
JMM-5012-APH PC/104+ 196W Power Supply with +5V/+12V, heatspreader
JMM-5012-AH PC/104 196W Power Supply with +5V/+12V, heatspreader
JMM-5000-APK PC/104+ 100W Power Supply with +5V, heatsink
JMM-5000-AK PC/104 100W Power Supply with +5V, heatsink
JMM-5000-APH PC/104+ 100W Power Supply with +5V, heatspreader
JMM-5000-AH PC/104 100W Power Supply with +5V, heatspreader