contact us
Tel: (65) 63742113 Operation Hours
Monday to Friday |
PC/104+ 100~218W DC/DC Power Supply with +5V/+12V/+3.3V/standby voltages, Heatsink/Heatspreader
JMM-5000 is a series of high-efficiency, high-precision PC/104 form factor DC/DC power supplies with complete DC-DC voltage regulator circuitry, integrated thermal solution, detachable screw terminal block I/O connections, and PC/104+ bus connectors. The wide input voltage range of 7 to 34VDC is compatible with industry standard 12V, 24V, and 28V inputs.
On-board intelligence provides an unsurpassed level of control, monitoring and safety. All features are accessible and configurable via benchtop application software plus a programming library for real-time control.
The full featured JMM-5312 models include a system controller that offers advanced configuration, control, and monitoring features. The system controller is accessed via a USB port and is accompanied by benchtop configuration software as well as an application library for in-application real-time control.
• Individual supply on/off control for +12V, +5V, +5V standby, +3.3V, and +3.3V standby outputs
• Individual supply output voltage / current monitoring
• Output voltage sequencing and slew rate control
• Output voltage adjustment
• Input voltage monitoring
• Fault handling based on programmable limits with interrupt notification, including supply shutdown in case of overload or other programmed conditions
• Hiccup mode for auto-restart when fault conditions are removed
• Min / max voltage and temperature logging
• Secondary input cutover voltage selection
The JMM-5000 uses a state-of-the-art design with the latest generation high efficiency components. It delivers efficiency as high as 95 percent, reducing input power requirements as well as heat generation.
JMM-5000 was engineered for rugged applications such as automotive or on-vehicle. Extended temperature operation of -40°C to +85°C is tested and guaranteed. Low-profile, surface mount components reduce susceptibility to shock and vibration. Both a low profile heat sink and heat spreader cooling options are available. I/O connections are made with locking screw terminal blocks for the highest degree of ruggedness.
Input voltage | 7 – 34VDC |
Input protection | Over / under voltage, reverse polarity, surges, transients, reflected noise |
Output voltage / current | +5V at 20A max. +12V at 8A max. +3.3V at 5A max. +5V standby at 1A max. +3.3V standby at 0.1A max. |
Output protection | Current limit and short circuit protection |
Load regulation | ±0.8%, Vmin to Vmax, 0-100% load on all outputs, -40°C to +85°C 0.35% maximum output voltage droop at 5V output, 0-20A load, VIN = 12V, TA = 25°C |
Output ripple | 44mV peak-to-peak max. 12mV peak-to-peak at 5V output, 0-20A load, VIN = 12V, TA = 25°C |
Efficiency | 92-94% at 5V output, 0-20A load, VIN = 12V, TA = 25°C |
Transient load response | +/-72mV at 5V output, 25-75% load step, 2.5A/usec ramp rate, VIN = 24V, TA = 25°C |
Temperature stability | +/-0.5% at 5V output, 10A load, VIN = 24V, TA = -40°C to 85°C |
On / off | Remote or programmable on/off logic input |
Bus Interface | PC/104+ |
Dimensions | 90 x 96 mm Maximum height 0.435″ (11mm) above PCB top surface |
Operating temperature | -40°C to +85°C |
Operating humidity | 5% to 95% non-condensing |
Weight | 179g with heatsink 230g with heat spreader |
Model | Description |
JMM-5312-APDRK | PC/104+ 218W DC/DC power supply with +5V/+12V/+3.3V/standby voltages, heat sink |
JMM-5312-ADRK | PC/104 218W DC/DC power supply with +5V/+12V/+3.3V/standby voltages, heat sink |
JMM-5312-APDRH | PC/104+ 218W DC/DC power supply with +5V/+12V/+3.3V/standby voltages, heat spreader |
JMM-5312-ADRH | PC/104 218W DC/DC power supply with +5V/+12V/+3.3V/standby voltages, heatspreader |
JMM-5012-APK | PC/104+ 196W Power Supply with +5V/+12V, heatsink |
JMM-5012-AK | PC/104 196W Power Supply with +5V/+12V, heatsink |
JMM-5012-APH | PC/104+ 196W Power Supply with +5V/+12V, heatspreader |
JMM-5012-AH | PC/104 196W Power Supply with +5V/+12V, heatspreader |
JMM-5000-APK | PC/104+ 100W Power Supply with +5V, heatsink |
JMM-5000-AK | PC/104 100W Power Supply with +5V, heatsink |
JMM-5000-APH | PC/104+ 100W Power Supply with +5V, heatspreader |
JMM-5000-AH | PC/104 100W Power Supply with +5V, heatspreader |