XT/GbE-8/12

8- or 12-port Gigabit Managed Carrier Ethernet Switch

  • Description
  • Specifications
  • Ordering Guide
  • Optional Accessories

XT/GbE is a PC/104 size board that provides 8- or 12-ports of Carrier Grade Ethernet switching capabilities.

Excellent for high-end applications such as Mobile and Microwave backhaul, the XT/GbE is also a highly reliable way to communicate with 10/100/1000 devices in an embedded system.  It is powered by the latest Vitesse VSC7428 Carrier Ethernet Switch engine. With a 416 MHz MIPS 32-bit CPU, coupled with 1Gb DDR2 external memory, it supports DMA-based frame extraction and insertion support timing over packet, Ethernet OAM, and performance monitoring.

Available in models with RJ-45 or Rugged Positive Locking Headers, this embedded Ethernet switch is ideal for any type of environment.

Ethernet Switch Engine Vitesse VSC7428 Carrier Grade Ethernet Switch Chipset (XDG016~021)
Vitesse VSC7429 Carrier Grade Ethernet Switch Chipset (XDG010, XDG013)
Memory 1Gb DDR2 SDRAM
128Mb Serial NOR Flash
Port Type Gigabit Ethernet (10/100/1000 Mbps)
Layer 2 Switching – 802.1Q VLAN switch with 8K MACs and 4K VLANs
– Push/pop up to two VLAN tags
– IPv4/IPv6 multicast
– Policing with storm control and MC/BC protection
– RSTP and MSTP support
– Hardware and software-based learning
– Link aggregation (IEEE 802.3ad)
– Independent and shared VLAN learning (IVL, SVL)
– Jumbo frame support
Connectors 8x low profile RJ-45 or 8x Rugged Positive Locking Headers
(refer to Ordering Guide for available versions)
Management Interface Options Web Interface
RS-232 Serial Interface (CLI)
Software API
Indicator LEDs – 2 LEDs per port (available on RJ-45 and through external connector)
– Power Rail LEDs
– Status LEDs
Operation Mode Switch can be used as a standalone unit OR it can be paired with an
embedded SBC
Power Input Wide input rage: +9V to +36V DC with Reverse Polarity Protection
Can be powered from external connector OR directly from expansion bus
Power Consumption Idle: 0.3A, 3.6W Typical: 0.35A, 4.2W Max: 0.5A, 6W (with +12V input)
Bus Interface (optional) Model dependent:
– PC/104 bus for sourcing power or,
– PCIe/104 bus for sourcing power & management interface
– Standalone operation (Bus-less)
Dimensions 90 x 96 mm
Operating Temperature -40 to +85°C

 

Model Description
XDG016 XT/GbE 8-port GbE Managed Carrier Ethernet Switch with RJ-45, Heatspreader (Standalone)
XDG017 PC/104 XT/GbE 8-port GbE Managed Carrier Ethernet Switch with RJ-45, Heatspreader
XDG018 PCIe/104 XT/GbE 8-port GbE Managed Carrier Ethernet Switch with RJ45, Heatspreader
XDG019 XT/GbE 8-port GbE Managed Carrier Ethernet Switch with Rugged Locking Pin Headers, Heatspreader (Standalone)
XDG020 PC/104 XT/GbE 8-port GbE Managed Carrier Ethernet Switch with Rugged Locking Pin Headers, Heatspreader
XDG021 PCIe/104 XT/GbE 8-port GbE Managed Carrier Ethernet Switch with Rugged Locking Pin Headers, Heatspreader
XDG022 PCIe/104 XT/GbE 12-port GbE Managed Carrier Ethernet Switch with RJ-45, Heatspreader
XDG023 PCIe/104 XT/GbE 12-port GbE Managed Carrier Ethernet Switch with Rugged Locking Pin Headers, Heatspreader
XDG029 XT/GbE 12-port GbE Managed Carrier Ethernet Switch with Rugged Locking Pin Headers, Heatspreader (Standalone)

 

Model Description
XHG101 8 or 12 Port Conduction Cooled Heatplate (Standalone Item)
CKG012 Cable Kit: 8 x P115-012
CKG019 Cable Kit: 8x CBG117, 1 x CBG127
CKG029 Cable Kit: 2x CBG117, 1 x CAG104
CAG104 2×5 0.1” IDC to DB-9 cable
CBG117 RJ-45 panel mount to 10-pin MiniTek
CBG127 RJ-45 panel mount to 10-pin MiniTek
P115-012 RJ-45 panel mount to RJ-45 Male Plug
MSG062 12V Power Supply w/ 3.5mm Terminal Block Adapter